System Information - Foxconn D42S 3.0 User Manual

System Information

CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
System Time
System Date
► SATA Channel 1
► SATA Channel 2
Model Name
BIOS Version
Build Date
Memory
MAC Address
Intel(R) Atom(TM) CPU D425
↑↓←→:Move Enter:Select
This submenu is used to set up the standard BIOS features, such as the date, time, IDE channel
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
► System Time
This item allows you to configure the desired time. Use [ENTER] to enter the setting, then use
[TAB] to move forward a field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.
► System Date
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.
► SATA Channel 1 /SATA Channel 2
While entering setup, BIOS automatically detects the presence of SATA devices. This item
displays the drive information of SATA devices.
► Model Name
This item shows the model name.
► BIOS Version
It displays the current BIOS version. User can check this information and discuss with the field
service people if a BIOS upgrade is needed.
► Memory
This item shows the information of the system memory, determined by POST(Power On Self
Test) of the BIOS.
System Information
[17 : 33 : 49]
17
[Tue 01/18/2010]
[Not Detected]
[Not Detected]
:D42S 3.0/D52S 3.0
:AA3F1012
:11/12/10
:1024MB
:00-E0-4C-68-00-06
@ 1.80GHz
+/-/:Value F10:Save ESC:Exit
F9:Optimized Defaults
20
Help Item
Use [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Time.
F1:General Help