Enter Bios Setup; Main Menu - Foxconn D42S 3.0 User Manual

enter bIoS Setup

The BIOS is the communication bridge between hardware and software, correctly setting up the
BIOS parameters is critical to maintain optimal system performance. Power on the computer,
when the message "Press <Del> to enter Setup, <eSC> to boot menu" appears at the bottom
of the screen, you can press <Del> key to enter SETUP.
!
We do not suggest that you change the default values in the BIOS Setup, and we shall
not be responsible for any damage which resulted from the change you made.

Main Menu

The main menu allows you to select from a list of setup functions together with two exit choices.
Use the arrow keys to select a specific item and press <Enter> to go to the submenu.
Each item in the main menu is explained below:
CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
► System Information ► System Information
►Advanced BIOS Features
► Advanced Chipset Features
► Integrated Peripherals
► Power Management Setup
↑↓←→:Move Enter:Select
► System Information
It displays the basic system configuration, such as BIOS ID, system date and time. They all can
be seen or set up through this menu.
► Advanced BIOS Features
The advanced system features can be set up through this menu.
► Advanced Chipset Features
The values for the chipset can be changed through this menu, and the system performance can
be optimized.
► Integrated Peripherals
All onboard peripherals can be set up through this menu. There are IDE devices, Super I/O
devices such as Serial I/O and other USB devices... etc.
► Power Management Setup
+/-/:Value
F9:Optimized Defaults
Configure Time and Date. Display System Information...
v02.61 (c) Copyright 1985-2010, American Megatrends, Inc.
► PC Health Status
► BIOS Security Features
Load Optimal Defaults
Save & Exit Setup
Exit Without Saving
F10:Save ESC:Exit
18
F1:General Help