Bios Security Features - Foxconn D42S 3.0 User Manual

bIoS Security features

Supervisor Password : Installed
User Password
Change Supervisor Password
Change User Password
Password Check
► Trusted Computing
↑↓←→:Move Enter:Select
► Change Supervisor Password
This item is used to install or change supervisor password.
After you input Supervisor password, it then will ask you to input
user password optionally.
If you have installed the supervisor password, the following
items will appear:
► Change User Password
This item is used to install or change user password.
► Password Check
When it is set to [Setup], a password is required to enter the BIOS setup; select [Always], a
password is required not only to enter BIOS setup, but also on each boot of your PC.
► Trusted Computing
Press <Enter> to go to its submenu.
CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
BIOS Security Features
: Installed
+/-/:Value
F9:Optimized Defaults
Install or change the
[Press Enter] password.
[Press Enter]
[Press Enter]
[Setup]
[Press Enter]
F10:Save ESC:Exit
34
Help Item
F1:General Help
Enter New Password :