Superio Configuration - Foxconn D42S 3.0 User Manual

SuperIO Configuration

Configure ITE8721 Super IO Chipset
Serial Port1 Address
Serial Port2 Address
Serial Port2 Mode
Parallel Port Address
Parallel Port Mode
Parallel Port IRQ
OnBoard CIR Port
↑↓←→:Move Enter:Select
► Serial Port1 Address
This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial
port 1.
► Serial Port2 Address
This item is used to assign the I/O address and interrupt request (IRQ) for the serial port 2.
► Parallel Port Address
This item is used to assign the I/O address for the onboard parallel port.
► Parallel Port Mode
This item is used to set parallel port mode.
► Parallel Port IRQ
This item is used to assign interrupt request (IRQ) for the onboard parallel port.
► OnBorard CIR Port
This item is used to assign the I/O address for onboard infrared chip.
CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
SuperIO Configuration
+/-/:Value
F9:Optimized Defaults
[3F8/IRQ4] Allows BIOS to Select
[3F8/IRQ4]
[2F8/IRQ3] Serial Port1 Base
[Normal] Addresses.
[378]
[Normal]
[IRQ7]
[Disabled]
F10:Save ESC:Exit
29
Help Item
F1:General Help