Understanding the printer menus
Use
Recycled
Paper
Card Stock
Transparency
Glossy
Rough/Cotton
Labels
Envelope
Universal Setup menu
Use
Units of Measure
Inches
Millimeters
Portrait Width
3–8.5 inches
76–216 mm
Portrait Height
3–14.17 inches
76–360 mm
To
Specify a paper type when Recycled is selected.
Notes:
•
Paper is the factory default setting.
•
The Recycled paper type must be supported in the selected tray or
feeder in order to print from that source.
To
Identify the units of measure.
Notes:
•
Inches is the US factory default setting.
•
Millimeters is the international factory default setting.
Set the width for portrait orientation.
Notes:
•
If the width exceeds the maximum, then the printer uses the
maximum width allowed.
•
8.5 inches is the US factory default setting. You can increase the
width in 0.01‑inch increments.
•
216 mm is the international factory default setting. You can increase
the width in 1‑mm increments.
Set the width for portrait orientation.
Notes:
•
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
•
14 inches is the US factory default setting. You can increase the
height in 0.01‑inch increments.
•
356 mm is the international factory default setting. You can increase
the height in 1‑mm increments.
59