Table of Contents
Advertisement
3.2
Keypad Tones
Table 4: Keypad Tones
Tone
(Tone Diagram)
Fire Alarm
__
__
__
__
Burglary Alarm
_ _ _ _ _ _ _ _ _ _ _
Trouble
__ __ __ __ __ __ __ __
Key Press
_
Entry Delay
_ _ _ _ _ _ _ _ _ _
(Fast)
Exit Delay
_ _
_ _
_ _
(Slow)
Error
__ __ __ __
OK
__
Chime
__
Last Chance
_ _ _ _ _ _ _ _ _ _
(Fast)
Bosch Security Systems | 12/04 | 4998149924B
DS7446KP | User Guide | 3.0 Keypad Overview
When a fire zone goes into alarm, the keypad sounds
the Fire Alarm tone. Enter PIN to silence.
When your system is turned on and a burglary zone
goes into alarm, the keypad sounds the Burglary
Alarm tone. The sounder remains on for the duration
of the time set by your alarm company. Enter PIN to
silence.
When a system component is not functioning
correctly, the keypad sounds the Trouble tone.
Pressing any key on the keypad sounds the Key
Press tone, indicating that the key press is accepted.
When you enter the building through a zone
programmed for Entry Delay, the keypad sounds the
Entry Delay tone to remind you to turn your system
off. If the system is not turned off before the Entry
Delay time ends, an alarm event occurs and a report
is sent to the alarm receiving center (ARC).
After you turn your system on, the keypad sounds the
_ _
Exit Delay tone. If you do not leave before the Exit
Delay time ends and an Exit Delay zone is faulted
(opening a door specified as an Exit Delay zone), an
alarm event begins.
If you press an incorrect key, the keypad sounds the
Error tone. This tone is the same tone as the Trouble
tone, but it is not repeated.
The OK tone indicates that a keypad entry is
accepted (for example, a correct PIN is entered). Also
sounds when exiting some functions.
The keypad sounds the Chime tone to alert you when
any chime zone is faulted.
During the last 10 seconds of Exit Delay, the keypad
sounds the Last Chance warning tone. Exit the
building when you hear this tone.
Description
11
Advertisement
Table of Contents
