Keypad Commands; Basic System Arming Commands; Turn The System All On; Turn The System Perimeter Only On - Bosch DS7446KP User Manual

DS7446KP | User Guide | 4.0 Basic System Arming Commands
3.4

Keypad Commands

After entering a command, the keypad might ask you to enter your PIN to
continue.
After you enter your PIN, follow the instructions that appear on the
keypad's display to perform the command.

4.0 Basic System Arming Commands

The Exit Delay timer starts immediately after you press an
arming key sequence and enter your PIN.
Leave the building before the Exit Delay timer ends. Leaving
afterward starts an alarm event.
The keypad sounds the Last Chance tone during the last 10
sec of Exit Delay time.
4.1

Turn the System All On

[On] or [# Command][1]
Use this command to turn on all zones within the keypad's area.
4.2

Turn the System Perimeter Only On

[Perimeter] or [# Command][2]
Use this command to turn on part of your system, leaving the rest of the
system off.
Your alarm company determines which zones turn on for Perimeter Only
On.
Bosch Security Systems | 12/04 | 4998149924B 13