DS7446KP | User Guide | 11.0
11.0 Optional Commands
11.1
Chime Mode
[# Command][6][1] – Enable Chime Mode
[# Command][6][2] – Select Chime Tone
[# Command][6][3] – Select Chime Zones
Chime Mode, when turned on, sounds a tone whenever the system is off
and a chime zone, such as a door or window, is faulted.
Some common uses of Chime Mode include:
Alerting employees when a customer walks through the main
entrance of small stores
Monitoring the location of young children within a household
Follow these steps to use Chime Mode:
1. Press [# Command][6][3] to select which zones to chime.
Press [0][*] to clear Chime Mode settings for all zones.
-
To select a specific zone, enter the zone number and press [*]. For
-
example, press [5][*] to select Zone 5 as a Chime zone.
2. Press [# Command] when you are done selecting Chime zones.
3. Press [# Command][6][2] to select a Chime tone. Refer to Table 14.
Table 14: Chime Tone Selections
Chime Tone
Off
Short Beep
Beep Until Keypress
Beep Until Closed
Bosch Security Systems | 12/04 | 4998149924B
Key
Description
[1]
Keypad displays chime zone number, but does
not sound a tone.
[2]
Keypad displays chime zone number, and
sounds a tone.
[3]
Keypad displays chime zone number, and
sounds a tone until you press [# Command].
[4]
Keypad displays chime zone number, and
sounds a tone until the chime zone is returned to
normal. For example, close the opened door or
window. Pressing [# Command] also silences
the tone.
Optional Commands
29