Command][5][3]; Command][9][2]; Renew One-Time Pins; Enable Installer Pin - Bosch DS7446KP User Manual

DS7446KP | User Guide | 10.0 PIN Commands
10.4

Renew One-Time PINs

[# Command][5[3]
One-time PINs can turn the system off only once. This PIN is typically
given to someone who needs temporary access to the building, such as a
maintenance crew or a baby-sitter.
Use this command to renew one-time PINs. When the one-time PINs are
renewed, they can be used again to turn the system off only once.
If there are multiple one-time PINs, press [0][*] to renew all of them.
To renew a specific one-time PIN, enter the user number and then press
[*]. For example, if user PIN 5 is a one-time PIN, press [5][*] to renew it.
The keypad automatically exits this command.
10.5

Enable Installer PIN

[# Command][9][2]

Use this command to allow the installer from your alarm company to use
a special PIN to access your system.
Depending on your system's programming, this command might not be
available.
28 Bosch Security Systems | 12/04 | 4998149924B