Optional Cable Connector Descriptions - National Instruments AT-MIO/AI E Series User Manual

Optional Cable Connector
Descriptions
National Instruments Corporation
This appendix describes the connectors on the optional cables for the
AT E Series boards.
Figure B-1 shows the pin assignments for the 68-pin MIO connector.
This connector is available when you use the SH6868 or R6868 cable
assemblies with the AT-MIO-16E-1, AT-MIO-16E-2,
AT-MIO-16E-10, AT-MIO-16XE-10, AT-AI-16XE-10, or
AT-MIO-16XE-50. It is also one of the two 68-pin connectors
available when you use the SH1006868 cable assembly with the
AT-MIO-16DE-10 or AT-MIO-64E-3.
B-1
Appendix
B
AT-MIO/AI E Series User Manual