Compatibility - National Instruments AT-MIO/AI E Series User Manual

Appendix A Specifications for AT-MIO-16XE-10 and AT-AI-16XE-10
Timing I/O
Triggers
AT-MIO/AI E Series User Manual
Number of channels ...........................2 up/down counter/timers,
Resolution
Counter/timers ............................ 24 bits
Frequency scaler......................... 4 bits
Compatibility .....................................TTL/CMOS
Base clocks available
Counter/timers ............................ 20 MHz, 100 kHz
Frequency scaler......................... 10 MHz, 100 kHz
Base clock accuracy ........................... 0.01%
Max source frequency ........................20 MHz
Min source pulse duration .................10 ns, edge-detect mode
Min gate pulse duration .....................10 ns, edge-detect mode
Data transfers.....................................DMA, interrupts,
DMA modes.......................................Single transfer
Analog Trigger
Source................................................ACH<0..15>, PFI0/TRIG1
Level.................................................. Full-scale, internal;
Slope..................................................Positive or negative (software
Resolution..........................................12 bits, 1 in 4,096
Hysteresis ..........................................Programmable
Bandwidth (-3 dB) .............................255 kHz internal,
1 frequency scaler
programmed I/O
10 V, external
selectable)
4 MHz external
A-24 National Instruments Corporation