Installing Batteries - HoMedics BPA-110 Instruction Book

INSTALLING BATTERIES

1. Press down on latch and lift the battery cover to open the
battery compartment.
2. Install or replace 4 "AA " sized batteries in the
battery compartment according to the indications inside the
compartment.
3. Close the battery cover by pushing in the top end of the
battery door.
Replace the batteries if:
1. The weak battery symbol appears on the display.
2. Nothing appears on the display when the power is
switched on.
As the supplied batteries are for test only, they may be
discharged earlier than batteries you buy in stores. Replace
all batteries at one time (as simultaneous set). Use only 1.5V
AA alkaline batteries. Remove batteries when unit is not in
use for extended periods of time. Date and time will need to
be reset if batteries are removed or replaced. Clean contacts
on battery and in battery compartment with a soft dry cloth
each time you install batteries.
Note: Batteries are hazardous waste. Do not dispose of them
together with the household garbage.
Battery
Cover
11