Installing Batteries - HoMedics HL858DM Instruction Manual

Installing Batteries

When LOW BATTERY SYMBOL
reaction toward operation, please change batteries.
Replace all worn-out batteries with new ones and do not mix new and
used batteries. Do not mix alkaline, standard (carbon-zinc) or
rechargeable (cadmium) batteries either. Such action may shorten
the battery life or cause the device to malfunction.
Slide the battery cover and insert 4 AA (LR6) alkaline batteries into
the battery compartment as shown on the figure below. Make sure
the polarities "+" and "–" ends are coinciding with similar markings
engraved on the battery housing.
！
*Attention
 Batteries are hazardous waste. Do not dispose of them together with the household
garbage. Please discard worn-out batteries to the recycling site according to local
regulations.
 Keep the battery away from children in case they choke on it.
 To prolong the battery life and prevent damage caused by leakage, remove the
batteries from the device if the device is not to be used for a long period.
 The device will keep the last measuring results after changing batteries, please reset
date and time.
 Please replace all worn-out batteries with new ones when you are operating the
Advanced IHB Detection feature, and the LOW BATTERY SYMBOL
the display.
appears on the display, or no
20
appears on
VER: A001 202203