Installing Batteries - HoMedics BPS-060-DDM Manual

INSTALLING BATTERIES

1. Press down on latch and lift the battery cover to
open the battery compartment.
2. Install or replace 4 "AA" sized batteries in the
battery compartment according to the indications
inside the compartment.
3. Replace the battery cover by clicking in the
bottom hooks first, then push in the top end of
the battery door.
Battery
Cover
11
Replace the batteries if:
1. The weak battery symbol appears on the display.
2. Nothing appears on the display when the power is
switched on.
As the supplied batteries are for test only, they may
be discharged earlier than batteries you buy in stores.
Replace the batteries in pairs. Use only 1.5V AA
alkaline batteries. Remove batteries when unit is
not in use for extended periods of time. Date and time
will need to be reset if batteries are removed or
replaced.
Note: Batteries are hazardous waste. Do not dispose
of them together with the household garbage.
12