Problem Solver - GE JGSP20 Use And Care Manual

PROBLEM
FOOD DOES NOT
ROAST OR BAKE
PROPERLY
OVEN TEMPERATURE
TOO HOT OR TOO COLD
CONTROL SIGNALS AFTER
ENTERING OVEN TIME
OR STOP TIME
CLOCK AND TIMER
DO NOT WORK
OVEN NOT CLEAN
AFTER CLEAN CYCLE
OVEN WILL NOT
SELF-CLEAN
OVEN LIGHT DOES
NOT COME ON
STRONG ODOR
"BURNING" OR "OILY"
ODOR EMITTING FROM
OVEN WHEN TURNED ON
FAN NOISE
If you need more help... call, toll free:
GE Answer Center
800.626.2000
consumer information service
34

PROBLEM SOLVER

(continued)
POSSIBLE CAUSE
* Shelf position is not correct.
Oven thermostat needs adjustment. See the Adjust the Oven Thermostat—
This is reminding you to enter a bake temperature.
Make sure the electrical plug is plugged into a live, properly grounded
power outlet.
. See the (Xen Control, Clock and Timer section.
Oven controls not set properly.
Heavily soiled ovens require 3'% to 4-hour clean time.
Heavy spillovers should be cleaned up before starting clean cycle.
Stop Time must be more than 3 hours later than Start Time.
Allow the range to cool to room temperature and reset controls.
Bulb may be loose or burned out.
Electrical plug must be plugged into a live power outlet.
Switch operating oven light is broken. Call for service.
Improper air/gas ratio in oven. Adjust oven burner air shutters. See the Minor
Adjustments You Can Make section.
first few times oven is used. This is temporary.
This is normal in a new oven and will disappear in time. To speed the process,
set a self-clean cycle for a minimum of 3 hours. See the Operating the Self-
Cleaning Oven section.
A fan may automatically turn on and off to cool internal parts.
This is normal and the fan may continue to run even after the
oven is turned off.