GE JGSP20 Use And Care Manual page 11

1. CLEAIVOFF. Press this pad to cancel all oven
operations except the clock and timer.
2. PROGRAM STATUS. Words light up in the
display to indicate what is in the time display.
Programmed information can be displayed at any
time by touching the pad of the operation you want
of day while the timer is counting down by
i me
pressing the CLOCK pad.
3. TIME DISPLAY. Shows the time of day, the times
set for the timer or the automatic oven operation.
4. OVEN TEMPERATURE AND BROIL
DISPLAY. Shows the oven temperature or the
broil setting selected.
5. FUNCTION INDICATORS. Lights up to
show whether oven is in the bake, broil or self-
clean mode.
6. INCREASE. Short taps to this pad increase the
time or temperature by small amounts. Press and
hold the pad to increase the time or temperature by
larger amounts.
7. TIMER ON/OFF. Press this pad to select
the timer function. The timer does not control
oven operations. The timer can time up to 9 hours
and 55 minutes.
To set the timer, first press the TIMER ON/OFF
pad. Then press the INCREASE or DECREASE
pad to change the time.
To cancel the timer, press and hold the TIMER
ON/OFF pad until the word "TIMER" disappears
from the display.
&
8. CLOCK. To set the clock, first press the CLOCK
pad. Then press the INCREASE-or DECREASE
pad to change the time of day.
9. STOP TIME. Use this pad along with the
COOK TIME or CLEAN pad to set the oven
start automatically at a iime you select.
to
10. COOK TIME. Press this pad for the Timed
Baking operations.
11. CLEAN. Press this pad to select the self-cleaning
function. See the Operating the Self-Cleaning
Oven section.
12. BROIL. Press this pad to select the broil function.
13. BAKE. Press this pad to select the bake function.
14. DECREASE. Short taps to this pad decrease the
time or temperature by small amounts. Press and
hold the pad to decrease the time or temperature
by larger amounts.
If "F-" and a number flash in the display,
and the oven control signals, this indicates
function error code. Press the CLEAWOFF pad.
Allow the oven to cool for one hour. Put the oven
back into operation. If the function error code
repeats, disconnect the power to the range and
call for service.
11