Display Mode Speed (Speed); Display Mode Speed/H (Operating Hours); Display Mode Speed/Clk (Clock); Display Mode Speed/Lap (Lap Time) - KTM 450 EXC EU Owner's Manual

CONTROLS

Display mode SPEED (speed)

5.24

Display mode SPEED/H (operating hours)

5.25

Display mode SPEED/CLK (clock)

5.26

Display mode SPEED/LAP (lap time)

5.27
–
Press the button
the display.
The current speed is displayed in the SPEED display mode.
The current speed can be displayed in Km/h or Mph.
Info
Making the setting according to the country.
When an impulse comes from the front wheel, the left side of the speedometer
display changes to the SPEED mode and the current speed is shown.
400317-02
Condition
• The motorcycle is stationary.
–
Press the button
display.
In display mode H, the operating hours of the engine are displayed.
The operating hours counter stores the total traveling time.
Info
The operating hours counter is necessary for ensuring that maintenance work is
carried out at the right intervals.
400316-01
If the speedometer is in H display mode at the start of the journey, it automati-
cally changes to the ODO display mode.
The H display mode is suppressed during the journey.
Press the button
Press the button
Press the button
for 3 - 5 seconds.
Press the button
briefly.
–
Press the button
the display.
The time is displayed in CLK display mode.
Press the button
Press the button
Press the button
for 3 - 5 seconds.
Press the button
400319-01 briefly.
–
Press the button
the display.
In the LAP display mode, up to 10 lap times can be timed with the stop watch.
Info
If the lap time continues after you press the button
already occupied.
Lap 10 must be timed with the button
Press the button
400320-01
Press the button
Press the button
for 3 - 5 seconds.
briefly and repeatedly until SPEED appears on the left side of
briefly and repeatedly until H appears at the bottom right of the
. No function
. No function
The display changes to the Setup menu of the speedometer
functions.
Next display mode
briefly and repeatedly until CLK appears at the bottom right of
. No function
. No function
The display changes to the Setup menu of the clock.
Next display mode
briefly and repeatedly until LAP appears at the bottom right of
.
. Starts or stops the clock.
. Stops the current lap time and saves it, and the stop watch
starts the next lap.
The stop watch and the lap time are reset.
17
, 9 memory locations are