KTM 450 EXC EU Owner's Manual page 49

SERVICE WORK ON THE CHASSIS
–
Tighten screw
Guideline
Screw, top steering head
101428-10
–
Tighten screw
Guideline
Screw, top steering stem
101334-11
–
Tighten screws
Guideline
Screw, top triple clamp
–
Secure the wiring harness with cable holder
101333-11
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front brake caliper
–
Mount cable binder
–
Position the brake line, wiring harness, and clamp. Mount and tighten screws
–
Install the front fender. (
–
Mount the handlebar cushion.
101326-11
–
Refit the headlight mask with the headlight. (
–
Install the front wheel.
–
Check that the wiring harness, cables, and brake and clutch lines can move freely
and are routed correctly.
–
Check the steering head bearing play. (
.

M20x1.5
.

M8
.

M8
M8
.

p. 51)
( p. 74)
x
p. 49)
12 Nm (8.9 lbf ft)
20 Nm
(14.8 lbf ft)
20 Nm
(14.8 lbf ft)
.

.

25 Nm Loctite ® 243™
(18.4 lbf ft)
p. 83)
47
.
