ELECTRICAL SYSTEM
–
Using a coin, turn locking cap
–
Remove speedometer battery
–
Insert the new battery with the label facing upward.
Speedometer battery (CR 2430) (
–
Check that the O-ring of the locking cap is seated properly.
101406-10
–
Position locking cap
–
Press any button on the speedometer.
The speedometer is activated.
–
Position the speedometer in the bracket.
–
Mount and tighten the screws with washers.
–
Refit the headlight mask with the headlight. (
–
Set kilometers or miles. (
–
Adjust the speedometer functions. (
101407-10
–
Set the clock. (
counterclockwise all the way and remove it.
.
p. 107)
and, using a coin, turn it clockwise all the way.
p. 15)
p. 16)
p. 15)
p. 83)
85