Overview Of Indicator Lamps (All Exc Models); Speedometer; Speedometer Activation And Test; Tripmaster Switch - KTM 450 EXC EU Owner's Manual

CONTROLS

Overview of indicator lamps (All EXC models)

5.16

Speedometer

5.17

Speedometer activation and test

5.18

Tripmaster switch

5.19
(Option: Tripmaster switch)
You can use the trip master switch to control the functions of the speedometer from the handlebar.
Info
The trip master is an optional accessory.
Possible states
High beam indicator light lights up blue – High beam is switched on.
FI warning lamp (MIL) lights up/flashes orange – The OBD has detected
an emission- or safety-critical fault.
The fuel level warning lamp lights up orange – The fuel level has
reached the reserve mark.
Turn signal indicator light flashes green – Turn signal is switched on.
101304-01
–
Press the button
menus.
–
Press the button
–
Press the button
Info
When the vehicle is delivered, only the SPEED/H and SPEED/ODO display modes
are activated.
400312-01
Activating the speedometer
The speedometer is activated when one of the buttons is pressed or an impulse comes
from the wheel speed sensor.
Display test
For the function test of the display, all display segments light up briefly.
400313-01
WS (wheel size)
After the display function test, the wheel size WS is displayed briefly.
Info
The number 2205 mm equals the circumference of the 21" front wheel with a
series production tire.
The display then changes to the last selected mode.
400314-01
to change the display mode or change to one of the Setup
to control different functions.
to control different functions.
14