GE ZET3038 Owner's Manual page 31

How to
The oven door must be closed and all controls must be set
correctly for the cycle to work properly.
delay the
start of
1 Select FEATURES.
cleaning
2 Select SELF CLEAN. Select upper or lower
3 Select the desired self clean.
4 Select DELAY CLEAN.
5 Using the number pads, enter the time of
6 Select ENTER.
7 Select START.
After a
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the oven
clean cycle
cools.
If white spots remain, remove them with a soap-filled
steel-wool pad and rinse thoroughly with a vinegar
and water mixture.
These deposits are usually a salt residue that
cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle.
oven on double oven models.
A 3-hour self-clean time is recommended
when cleaning small, contained spills.
A self-clean time of 4 hours or longer is
recommended for a dirtier oven.
LO (3 hrs) will self clean the oven for 3 hours.
STD (4 hrs) will self clean the oven for 4 hours.
ADJUST TIME allows oven to be set for any
time between 3 and 5 hours. Input the clean
time (to nearest 5 minutes) using the
number pads and select ENTER.
day you want the clean cycle to start.
The door locks automatically when you select
START. The oven will remain locked. The display
will show the start time. Once the self-clean cycle
starts, it will not be possible to open the oven
door until the temperature drops below the lock
temperature and the goes off.
When goes off, you will be able to open the
door.
NOTE: On double oven models, you can set a delay
clean in both ovens. However, the second oven set will
automatically delay the start of cleaning until the end
of the first oven's clean cycle.
• You cannot set the oven for cooking until the
oven is cool enough for the door to unlock.
• If the racks become hard to slide, wipe the
rack supports with cooking oil.
31