The Control System; The Control Switch; Removable Cash Drawer - Olivetti CMS 140 B euro Instructions Manual

The Control System

The Control Switch

The control switch is located under the journal compartment cover
and allows you to use the Off mode where the machine is turned off,
the R1 (Register 1) mode where the register generates a journal record
wound on the spindle, the R2 (Register 2) mode where the register
generates customer receipts outside the machine, the X mode where
you can generate X (mid-day) reports, the Z mode where you can
generate Z (end-of-day) reports and the PRG mode where you can
program the machine according to your needs. This switch must be
properly positioned to operate the cash register or set the programs, and
is also used to print or reset the totals for the management report.
6
Depending on the desired operation, slide the control switch to the
following positions:
OFF The cash register is turned off and cannot be used.
R1 (On/Journal Tape) - The cash register is set for standard
operations, including preset options. A journal record is
printed for each transaction.
R2 (On/Customer Receipt) - The cash register is set for
standard operations, including preset options. A customer
receipt is printed for each transaction.
X Prints the X management (mid-day) report.
Z Prints the Z management (end-of-day) report and resets
totals (except the grand total) to zero.
PRG Used to set and change program settings.

Removable Cash Drawer

The cash drawer features slots for banknotes and slots for coins, and
has a security lock that can be opened or closed with a key. When
unlocked, the drawer can be opened manually by pushing it lightly on
the front.
If desired, the cash drawer can be completely removed from the cash
register. To do so simply lift the drawer up slightly and pull it out.