Table of Contents
Advertisement
Linking a Multiple/Single Item Cash Sale and Tax
Status to a Department
Proceed as follows:
1. Slide the control switch to the PRG position.
2. Define a [Multiple/Single Item] sale and [Tax Status] by referring
to the table above.
3. Press a [Department 1-8] key.
4. Program another feature or exit the program mode by sliding the
control switch to the OFF position
Example: Program a multiple item sale status and VAT 2 to
Department 2.
Type/Press:
[0] + [02] + [Department 2]
Price Look-Ups (PLUs)
A total of 12 Price Look Up Codes (PLUs) are available on this cash
register. The Price Look Up system allows for fast, accurate entry of an
item and automatically records the number of items sold.
Before getting started with programming PLUs, proceed with the
following steps:
1. Make a list of the PLU numbers and their prices you wish to
program.
2. Determine if each PLU number requires tax or no tax. If tax is
required for a particular PLU number, be sure to link the PLU
number to a department that is programmed for tax. Likewise, if a
PLU number does not require tax, then link the PLU number to a
department not programmed for tax.
Programming PLU Prices
Proceed as follows to program a PLU item price:
1. Slide the control switch to the PRG position.
2. Type a [PLU number between 1-12] and then press the [PLU] key.
3. Type the [unit price] that you wish to assign to that PLU and then
press the appropriate [Department] key.
4. Repeat steps 2 and 3 for all desired PLU numbers.
Example: Create PLU 1 with a unit price of £1.50 assigned to
Department 3 and then create PLU 3 with a unit price of £10.00
assigned to Department 6.
Type/Press:
[1] + [PLU] + [150] + [Department 3] + [3] + [PLU] + [1000] +
[Department 6]
NOTE: The PLU price must be of up to a maximum 6 digits.
Euro Exchange Rate Programming
You can program the Euro exchange rate so that the cash register can
automatically calculate the transaction from your local currency into
Euro and vice versa depending on the cash register's base currency
(Local or Euro). The cash register is programmed by default so that
your local currency is the base currency. If you wish to change the base
currency to Euro, refer to the "Programming System Options" section in
this manual, Machine Condition 10.
19
Advertisement
Table of Contents
