Battery Power Supply - Olivetti CMS 140 B euro Instructions Manual

Connecting the Cash Register to an Electrical Power
Outlet
Proceed as follows to connect the cash register to line voltage:
1. Slide the control switch to the OFF position.
2. Locate the power supply connector (A) on the back of the cash
register and plug the round connector of the power supply cable into
it.
3. Plug the power supply to the electrical outlet.
4. Slide the control switch to the R1 or R2 position. The cash register
is now ready for use.

Battery Power Supply

If it is impossible to use the power supply you must insert four 1.5 V
size C batteries to operate the cash register. When not using the cash
register, always slide the control switch into the OFF position to
increase battery life. If desired an automobile 6 V DC adaptor (not
included) can be used.
Inserting the Batteries
Proceed as follows to insert batteries:
1. Locate the battery compartment cover at the rear of the cash
register.
2. Open the cover by pressing down on the clip.
3. Insert the batteries into the compartment making sure that the
positive and negative poles are aligned correctly. Drawings inside
the battery compartment show how the batteries must be positioned.
4. Close the battery compartment until the cover clicks in place.
11