Maintenance; How To Clean The Case; Battery Care - Fluke Ti105 User Manual

Maintenance

The Imager does not require maintenance.
To prevent eye damage and personal injury, do not open the
Product. The laser beam is dangerous to eyes. Have the
Product repaired only through an approved technical site.

How to Clean the Case

Clean the case with a damp cloth and a weak soap solution. Do not use
abrasives, isopropyl alcohol, or solvents to clean the case or lens/window.

Battery Care

To prevent personal injury and for safe operation of the
Product:
Do not put battery cells and battery packs near heat or fire.
Do not put in sunlight.
Do not disassemble or crush battery cells and battery
packs.
Remove batteries to prevent battery leakage and damage to
the Product if it is not used for an extended period.
Connect the battery charger to the mains power outlet
before the charger.
Use only Fluke approved power adapters to charge the
battery.
Keep cells and battery packs clean and dry. Clean dirty
connectors with a dry, clean cloth.
To prevent damage, do not expose Product to heat
sources or high-temperature environments such as an
unattended vehicle in the sun.
 Warning
 Warning
 Caution
Thermal Imagers
Maintenance
45