7. Push:
to set the change and go back to the live view.
or to set the change and go back to the previous menu.
to cancel the change and go back to the live view.
If Display Information is set to Display All, you see the information
about current transmission correction as = xx.
Spot Temperatures
The Spot Temperatures are floating HI and LO temperature indicators that
move on the display as the temperature measurements of the image fluctuate.
To turn on/off the hot and cold spot indicators:
1. Push .
2. Push / to highlight Measurement.
3. Push or to view the menu.
4. Push / to highlight Spot Temp.
5. Push or to view the menu.
6. Push / to toggle this function ON or OFF.
7. Push:
to set the change and go back to the live view.
or to set the change and go back to the previous menu.
to cancel the change and go back to the live view.
If the Display is set to Display All, you see the information about
current transmission correction as = xxx%.
Note
Note
Thermal Imagers
Menus
25