Color Alarm; Set High-Temperature Color Alarm - Fluke Ti105 User Manual

8. Push / to highlight an option.
9. Push:
 to set the change and go back to the live view.
 or  to set the change and go back to the previous menu.
 to cancel the change and go back to the live view.

Color Alarm

The Imager has various apparent temperature color alarms (not applicable for
Ti100, Ti105, TiR105). The high-temperature color alarm shows a full visible
image and only shows infrared information on objects or areas that are above
the set apparent temperature alarm level. The low-temperature/dew point color
alarm shows a full visible image and only shows infrared information on
objects or areas that are below the set apparent temperature/dew point color
alarm level. The user must manually find and set these parameters. The imager
also displays color isotherms, or infrared information, inside or outside of a set
of both high and low limits.
The Imager does not sense ambient or surface dew point level
automatically. To use the low-temperature color alarm function as a
dew point color alarm, manual determination and input of surface
dew point temperature will yield the best results. Depending on the
situation, the colors presented will, or will not, actually show areas
with possible dew point condensation.
To view the Color Alarm menu:
1. Push .
2. Push / to highlight Image.
3. Push  or  to view the menu.
4. Push / to highlight Color Alarm.
5. Push  or  to view the menu.

Set High-Temperature Color Alarm

To set a high-temperature color alarm:
1. From the Color Alarm menu, push / to highlight the option:
Set High Alarm.
2. Push  to open the Color Alarm menu.
Note
Thermal Imagers
Menus
31