Video Recording; Video Playback - Fluke Ti105 User Manual

Video Recording

To record:
1. Pull the primary trigger to start recording. The r icon shows in the
upper left corner or the display and the recording time graphic at the
bottom of the display shows the remaining time.
2. Pull the primary trigger to pause recording. The p icon shows in the
upper left corner or the display.
3. Push  to end the recording session.
4. Push  to save the video file. The Imager displays the VIDEO
menu as a prompt to disable the feature or continue in the same mode.

Video Playback

To playback:
1. Push .
2. Push / to highlight Memory.
3. Push  to view the thumbnails of saved files.
4. Push     to highlight a file for playback. All .avi files
show the k icon in the upper right corner of the thumbnail.
5. Push  to set a file for playback.
6. Push  to start the playback. The i icon shows in the upper left
corner of the display if an audio file is attached to the video file.
7. During playback, push  or  for fast forward and rewind. Push
 to continue normal playback.
8. Push  to exit the playback mode.
Thermal Imagers
Menus
35