Primary And Secondary Triggers; How To Use The Control Buttons; Overview Of Controls - Fluke Ti105 User Manual

Primary and Secondary Triggers

The two-part trigger is located in the standard trigger position for a pistol-grip
device. The larger, green trigger is the primary trigger. The smaller, black
trigger is the secondary trigger.
In normal operation (video is off), the function of the primary trigger is to
capture a thermal image for possible storage to memory by the user. When
video is on, the primary trigger is the start/stop for video recording.
The secondary trigger operates the laser and torch. For information about how
to enable the laser and torch, see pages 36 and 37.

How to Use the Control Buttons

Three function buttons (, , ) and four arrow buttons
(, , , and ) are the primary controls. These buttons move the
cursor through the menu structure to set the features.
Table 5 is an overview of the buttons and their actions. In live Manual Mode,
the arrow buttons are always active to adjust Level and Span.
Button
, Trigger
, Trigger
, 
, 
, 
, 
Table 5. Overview of Controls
Button Label / Action
Cancel
Done (exit from Menu structure)
Select or OK
Back
Move cursor to highlight an option
Fast forward/rewind (video mode only)
Thermal Imagers
Primary and Secondary Triggers
13