Remote Control; Maintenance - Fluke TiX520 User Manual

can expect several minutes in delay before the scan is
complete.
5. Push / or touch the target to select a tool
name.
6. Push  or touch Done to select the tool.
The labels change to include an Edit function. By
default, the Imager shows and saves the data for the
selected tools.
To edit the selection:
1. Push / to highlight the tool name.
2. Push  or touch the Edit target. The Edit menu
gives you a choice to display the measurement data
and/or save it to the SD memory card.
The display updates to show the wireless icon and live
measurement for each selected wireless tool.

Remote Control

You can view the display of the Imager with a PC that has
SmartView software installed or the Fluke Connect mobile
app. The TiX560 Imager has the additional ability so you
can also remotely control the Imager with SmartView
software or the Fluke Connect app.
To set up:
1. Attach the included USB cable to the USB port on the
imager.
2. Connect the other end to a USB port on a PC.
3. In SmartView software, choose Remote Display from
the drop down menu to begin live video streaming on
the PC.
To remotely control and show the Imager's display:
1. If not installed, install the latest version of SmartView
software on your PC.
2. Attach the included USB cable to the USB port on the
Imager.
3. Connect the other end of the cable to a USB port on
the PC. appears in the SmartView workspace.
4. Select Remote Display from the drop down menu.
TiX560 only
5. Use the buttons and touch screen on the UI the same
as the physical Imager.
6. Follow the instructions in the software help files for
additional information about the controls on the
software UI.

Maintenance

The Imager does not require maintenance.
 Warning
To prevent eye damage and personal injury, do
not open the Product. The laser beam is
dangerous to eyes. Have the Product repaired
only through an approved technical site.
Expert Series Thermal Imager
Remote Control
39