FINAL DRIVE OIL
Oil Level Check
Check the final drive oil level when specified
by the maintenance schedule (page 94).
1. Place the motorcycle on its center stand
on level ground.
2. Remove the oil filler cap (1).
3. Check that the oil level reaches the lower
edge of the oil filler inspection hole (2).
If the level is low, check for leaks. Pour fresh
oil through the oil filler inspection hole until it
reaches the lower edge of the opening.
Recommended Oil:
HYPOID GEAR OIL SAE 80
(2)
(1)
(1) Oil filler cap
(2) Oil filler inspection hole
45