Rear Wheel Removal
1. Place the motorcycle on its center stand.
2. Remove the right side cover (page 67).
3. Release the wire harness (1) from the wire
harness holder (2).
4. Push the tab (3) and release the
connector (4) from the stay (5).
5. Pull the connector out.
6. Remove the bolts A (6) and exhaust cover (7).
7. Loosen the bolts B (8).
8. Remove the bolt C (9) and bolt D (10).
9. Pull the muffer (11) out and remove it.
(5)
(
) 4
(
) 3
(1) Wire harness
(2) Wire harness holder
(3) Tab
116
(1)
(2)
(4) Connector
(5) Stay
(6)
(9)
(11)
(10)
(6)
(6) Bolts A
(7) Exhaust cover
(8) Bolts B
(8)
(7)
(9) Bolt C
(10) Bolt D
(11) Muffler