Digital Clock
The digital clock will show hours and minutes
up to 12:59 with ʻʻAMʼʼ and ʻʻPMʼʼ.
To adjust the time, proceed as follows:
1. Turn the ignition switch ON.
2. Push and hold both the SEL button (2)
and SET button (3) for more than 2
seconds. The clock will be set in the
adjust mode with the hour display
flashing.
(2)
(3)
(1) Digital clock
(2) SEL button
(3) SET button
30
3. To set the hour, push the SEL button until
the desired hour and AM/PM are
displayed.
• The time is advanced by one hour,
each time the button is pushed.
• The time advances fast when the
button is pushed and held.
(1)