Honda NT700V Owner's Manual page 127

10. Remove the rear fender (page 69).
11. Remove the rear brake stopper bolt (12).
12. Remove the rear axle nut (13) while
holding the rear axle shaft (14) at the end
with a wrench.
13. Loosen the rear axle holding bolt (15).
14. Pull out the rear axle shaft.
(12) Rear brake stopper bolt
(13) Rear axle nut
(14) Rear axle shaft
(15) Rear axle holding bolt
(16)
(15)
(13)
(12)
(17)
15. Remove the rear brake caliper bracket
(16).
• When removing the brake caliper
bracket, be carefull not to damage the
sensor and pulser ring. (NT700VA)
16. Remove the rear wheel side collar (17).
17. Move the wheel to the right to separate it
from the final drive gear case (18).
18. Remove the rear wheel (19).
(18)
(14)
(16) Rear brake caliper bracket
(17) Rear wheel side collar
(18) Final drive gear case
(19) Rear wheel
(19)
117