Installing The Erm - HP R1500 - UPS XR User Manual

WARNING:
that the circuit breaker is in the Off position.

Installing the ERM

Before installing the ERM, review and observe all warnings in "Precautions (on page 13)."
WARNING:
equipment in the rack might cause the rack to become unstable. Install the heavier components
first, and then continue to populate the rack from the bottom to the top.
CAUTION:
Install the heaviest item first, and continue to populate the rack from the bottom to the top.
Install the mounting rails
1.
page 14).
With one person on each side of the carton, lift the chassis and lower it to the floor in front of the rack.
2.
To prevent personal injury from electric shock or damage to the equipment, verify
A risk of personal injury or damage to the equipment exists. Uneven loading of
Always plan the rack installation so that the heaviest item is on the bottom of the rack.
("Installing the mounting rails" on page 56, "Installing the mounting rails" on
ERM installation 60