Transferring To And From Other Seats - Invacare Crossfire T6 Owner's Operator And Maintenance Manual

Hide thumbs Also See for Crossfire T6:
Table of Contents

Advertisement

SECTION 2—SAFE HANDLING
5. If equipped, turn the anti‐tippers down. Refer to Footrest on page 24 in this manual.
DO NOT use an escalator to move a wheelchair between floors. Serious bodily
injury may occur.

Transferring To and From Other Seats

BEFORE attempting to transfer in or out of the wheelchair, every precaution should
be taken to reduce the gap distance. Turn both casters parallel to the object you are
transferring onto. Also be certain the wheel locks are engaged to help prevent the
wheels from moving.
When transferring, position yourself as far back as possible in the seat. This will
prevent damaged upholstery and the possibility of the wheelchair tipping forward.
NOTE: For this procedure, refer to FIGURE 2.4.
NOTE: This activity may be performed independently provided you have adequate mobility and 
upper body strength.
Position the wheelchair as close as possible along side the seat to which you are 
transferring, with the front casters parallel to it. Remove the armrest, if installed. Engage 
wheel locks. Shift body weight into seat with transfer.
During independent transfer, little or no seat platform will be beneath you. Use a transfer 
board if at all possible.
FIGURE 2.4 Transferring To and From Other Seats
Crossfire
Series Wheelchairs
WARNING
WARNING
18
Part No 1134872

Advertisement

Table of Contents
loading

This manual is also suitable for:

Top end crossfire t6Top end crossfire titanium

Table of Contents