Invacare Crossfire T6 Owner's Operator And Maintenance Manual page 32

SECTION 6—BACK
10. Unthread the placement screw until head of screw rests on seat rail (Detail "F").
11. Completely tighten jam nut up against bottom of back cane (Detail "F").
NOTE: When adjusted properly, the back should have a small amount of movement when locked
in the open position. Plunger pins should snap in and release easily without resistance.
DETAIL "A"
Placement
Jam Nut
Screw
Adjustment
Mounting screw secures the adjustment
Square
square from the other side of the plate
DETAIL "C"
Mounting Screw
Back Angle Plate
NOTE: Back angle plate, mounting screw and
adjustment square are removed for clarity.
™
Crossfire Series Wheelchairs
Back Cane
Recess for
Adjustment
Jam Nut
Square
Placement
Adjustment
Square
FIGURE 6.2 Back Angle Adjustment
32
DETAIL "B"
Jam
Placement
Nut
Screw
Adjustment
Square
Back
Angle
Plate
DETAIL "D"
Back
Cane
Screw
Seat
Rail
Back Cane
Part No 1134872