Removing/Installing The Batteries From/Into The Wheelchair; Removing The Front Shroud/Battery Retention Bracket And Rear Shroud - Invacare TDX SP User Manual

7 SETUP/MAINTENANCE
WARNING
Batteries with terminal configuration (POSITIVE on the right and NEGATIVE on the left) as shown below MUST be used.
Batteries that have the reverse terminal configuration MUST not be used - otherwise injury and damage may occur.
Terminals must have a cross hole in them as shown below.
Terminal Cross
Hole
NEGATIVE (-) Battery
Terminal/Post
7.6

Removing/Installing the Batteries From/Into the Wheelchair

Removing the Front Shroud/Battery Retention Bracket and Rear Shroud

CAUTION
Place the wheelchair in a well ventilated area where work can be performed without risking damage to carpeting or floor
covering.

For this procedure, refer to FIGURE 1 on page 84.
Invacare® TDX®SP, TDX SR
FOR WHEELCHAIRS USING GP24 BATTERIES
PROPER BATTERIES TO USE DO NOT USE THIS TYPE OF BATTERY
POSITIVE (+)
POSITIVE (+)
Battery Terminal/
Battery
Post
Terminal/Post
82
NEGATIVE (-)
Battery
Terminal/Post
Part No 1143190