Mpj+ Joysticks - Invacare TDX SP User Manual

Power wheelchair base
Hide thumbs Also See for TDX SP:
Table of Contents

Advertisement

7 SETUP/MAINTENANCE

MPJ+ Joysticks

For this procedure, refer to FIGURE 11.
Disconnecting
1.
Pull the latch away from the joystick connector.
2.
Disconnect the joystick connector from the remaining connectors
Connecting
Ensure the gaskets are installed in the top
connector cap and between network connectors.
1.
Ensure the latch is pulled away from the network connector.
2.
Connect the network connector to the other connectors.
3.
Top and Bottom Connectors - Install connector caps onto the
network connector.
4.
Push the latch in to secure the network connectors and caps.
5.
If necessary secure excess cable using tie-wraps.
Invacare® TDX®SP, TDX SR
Top Connector
Cap
Network
Connectors
Controller
Cable
Bottom
Connector
Cap
FIGURE 11
Disconnecting/Connecting the Joysticks - MPJ+
98
Latch
Gasket
Gasket
Gasket
Joysticks
Part No 1143190

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tdx sr

Table of Contents