Cmpj+ And Nxc Joystick Switches And Indicators; On/Off - Drive Select Toggle Switch (Cmpj+ Joystick) - Invacare TDX SP User Manual

5 WHEELCHAIR OPERATION
5.4

CMPJ+ and nXc Joystick Switches and Indicators


For this procedure, refer to FIGURE 5.

On/Off - Drive Select Toggle Switch (CMPJ+ Joystick)

The drive select toggle switch is located on the left side, below the LCD. The drive select position is momentary, meaning that it will return to the
neutral position after a selection is made.
This switch allows the operator to select the type of operation or performance which best suits a particular control need or situation. The DRIVE 1
program uses performance values which are independent of those used for the DRIVE 2 or 3 or 4 program. As an example, an operator may have a
control need for spasticity in the morning and a very different need in the afternoon. DRIVE 1 can be programmed for higher speeds and quicker
response while DRIVE 2 can be programmed for slower speeds and less responsiveness or vise versa. The other two drive programs could be indoor
and outdoor versions of DRIVE 1 and DRIVE 2.
Selecting the Drive Mode
1. Move the toggle up and release. DRIVE 1 will appear on LCD.
2. Move the toggle up and release again. DRIVE 2 will appear on LCD.
3. Move the toggle up and release again. DRIVE 3 will appear on LCD.
4. Move the toggle up and release again. DRIVE 4 will appear on LCD.
5. Move the toggle up and release one more time to select DRIVE 1.
On/Off - Mode Switch (nXc Joystick)
The on/off - mode switch is located on the left side, below the LCD. The
on/off - mode switch position is momentary, meaning that it will return
to the neutral position after a selection is made.
The nXc joystick will display only one programable drive
This switch allows the operator to select the type of actuator or option
operation.
Invacare® TDX®SP, TDX SR
Charger/Programming
Input (Front of Joystick)
On/Off - Drive Select
Toggle Switch
(CMPJ+ Joystick)
On/Off - Mode Switch
(nXc Joystick)
Programmable Mono
.
Port 1/2 or External
Mode Switch
FIGURE 5
46
Memory Card Slot
Joystick
CMPJ+ and nXc Joystick Switches and Indicators
LCD Display
Mode Switch
(CMPJ+ Joysticks
ONLY)
Speed Control
Knob
Remote On/Off
Input
(CMPJ+ Joysticks
ONLY)
To Controller
Part No 1143190