Spj™+ Joystick Switches And Indicators - Invacare nutron R51 Owner And Maintenance Manual

To drive the wheelchair, perform the following:
1. Adjust speed. Refer to Speed Control Buttons on page 34.
2. Turn the power On. Refer to Turning the Power On/Off on page 32.
3. Maneuver the joystick in the following manner:
MOVEMENT
FORWARD Push joystick forward, towards
the front of the wheelchair.
REVERSE Pull joystick back, towards the
rear of the wheelchair.
Turn RIGHT Move joystick toward the right
side of the wheelchair.
Turn LEFT Move joystick toward the left side
of the wheelchair.
STOP Release the joystick and the
wheelchair will slow to a stop.
SPJ™+ Joystick Switches and Indicators
NOTE: For the following information, refer to FIGURE 6.3.
On/Off
Button
Decrease
Speed Button
(Tortoise)
GREEN
LED
FIGURE 6.3 SPJ™+ Joystick Switches and Indicators
Part No. 1106645
ACTION
Information
Gauge
Display
Service Indicator
33
SECTION 6—WHEELCHAIR OPERATION
To Move
Left
To Move
Backward
Rear of
Wheelchair
FIGURE 6.2 Using the Joystick to Drive the
Wheelchair
Speedometer
Increase
Speed Button
(Hare)
Charger/Programming
Input
To Move
Forward
Front of
Wheelchair
To Move
Right
Joystick
Joystick
DETAIL "A" -
FRONT VIEW
R51™and R51LXP