SECTION 5—ARMS
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely. Otherwise injury or damage may occur.
Adjusting Armrest Height
WARNING
Make sure the height adjustment lever
is in the locked position before using the
wheelchair.
NOTE: For this procedure, refer to
FIGURE 5.1.
1. Unlock the armrest by flipping the
height adjustment lever on the top
front of the armrest to the up
(horizontal) position.
2. Adjust armrest to one of five positions.
NOTE: Height adjustment lever MUST be in
the unlocked position when placing armrest
into the arm assembly.
3. Lock the armrest by pressing the height adjustment lever into the down (vertical)
position when the desired armrest height is achieved.
4. Repeat STEPS 1-3 for other armrest.
Part No. 1110546
WARNING
Locked
(Vertical)
Unlocked
(Horizontal)
FIGURE 5.1 Adjusting Armrest Height
35
SECTION 5—ARMS
Height
Adjustment
Armrest
Lever
®
Tracer
EX2