Installing The Seat Positioning Strap - Invacare Tracer EX2 Owner's Operator And Maintenance Manual

SECTION 11—OPTIONS
6. Reinstall the back upholstery screw and washer and secure the strap to the wheelchair.
7. The base cleans easily with any chrome or glass cleaner. The strap can be cleaned with
mild soap and water.

Installing the Seat Positioning Strap

ALWAYS wear your positioning strap. Inasmuch as the seat positioning strap is an
option on this wheelchair (You may order with or without the seat restraint), Invac-
are strongly recommends ordering the seat positioning strap as an additional safe-
guard for the wheelchair user.
NOTE: For this procedure, refer to FIGURE 11.3.
1. Remove the bottom back upholstery screw from the wheelchair.
2. Position the seat positioning strap half between the back cane and back upholstery.
3. Secure the back upholstery and seat positioning strap to the wheelchair with the
existing back upholstery screw.
4. Repeat STEPS 1-3 for the opposite side of the wheelchair.
Back Upholstery
Screw
Strap Positioning
Strap
®
Tracer EX2
Strap
Base
Step
Tube
Locknut
FIGURE 11.2 Installing Crutch and Cane Carrier
WARNING
FIGURE 11.3 Installing the Seat Positioning Strap
Clamp
Back Cane
54
Back Upholstery
Part No. 1110546