Memory Tables - HP Carrier-grade cc2300 User Manual

Memory Tables

The following tables compare the steps taken with Single-bit and Multi-bit errors and provide the
type of memory information available from the PIC Console software.
SBE and MBE Comparison
Memory Error Handling
Generate SMI
Log information includes
Action after SEL logging
Indicated by PIC screen changes
Bad memory is mapped out at next reboot
Information available on the Sensor Information tab page of the PIC Console software:
Memory Array Dialog
Item
Maximum Memory Capacity
No. of Memory Device Sockets
No. of Memory Device Sockets Used
Memory Error Correction
Memory Array Location
Information on the Sensor Information tab page of the PIC Console software:
Memory Device Information
Item
Size
Memory Type
Device Locator
Device Error Type
Last Error Update
Total Width
Data Width
Type Detail
Error Count
32
SBE
Yes
Exact SIMM or DIMM
Continue operation
Immediately
Yes
Description
The maximum memory capacity in bytes on this system
The number of memory device (SIMM/DIMM) slots or sockets
available in this memory array
The number of slots or sockets populated by the memory
devices in this memory array
The hardware error correction or detection method supported
by this memory array
The physical location of the memory array, whether on the
motherboard or an add-on board
Description
Size of the memory device in bytes.
Type of memory used in the memory device.
A string identifying the socket location or board position of the memory device.
Example: "SIMM 3" or "IC12."
Most recent type of error that occurred on the memory device.
System state during the last error update.
Total width of the memory device (SIMM/DIMM including check bits), in bits.
Data width of the memory device in bits.
More information about the memory device type.
Summary of the error status for the memory device. This read-only attribute
contains a count of all SBEs on the memory device.
MBE
Yes
Memory bank only
Stop the system
After the system reboots
Yes (immediately after the failure)