HP Carrier-grade cc2300 User Manual page 28

The following table provides event information for third-party component instrumentation
supported by PIC.
Instrument (Notes) Choices
Adaptec SCSI* Storage Device Events Group
Storage device state information
Storage device recovered error - Bad block repaired
Storage device member marked down
Storage Controller Events Group
Storage Controller state information
Storage Controller SMART event
Storage Controller status unacceptable
Volume Set Events Group
Volume set state information
Volume set recovered error
Volume set Array status – offline
Spare Events Group
ARO spare not functional
Enclosure Events Group
Enclosure state information
LSI (Symbios) SCSI* Storage Devices Events Group
Device Error (not responding)
Device Warning (predicted failure(S.M.A.R.T.))
Storage Controller Events Group
Controller Error (not responding)
Mass Storage Association Events
New Storage controller detected
New device detected
Existing controller changed
Existing device changed
Note Event actions do not distinguish between instances of the same group. This means that event actions are configured
for a "class" of objects (i.e., host adapter) and not on individual instances of the group (i.e., host adapter 1, host
adapter 2).
Instrument (Notes) Choices
Intel LAN Adapter Indication Control Group
Total transmit errors threshold
Total receive errors threshold
Total host errors threshold
Total wire errors threshold
LAN Adapter Indication Control Group
Total transmit errors threshold
Total receive errors threshold
Total host errors threshold
Total wire errors threshold
QLogic SCSI Storage Devices Events
New or Recovered Storage Device
Error Storage Device Not Responding
Device Warning (predicted failure (S.M.A.R.T.))
Storage Controller Events
Informational SCSI Controller Event
Non-Critical SCSI Controller Error
Critical SCSI Adapter Event
28