Broadcast And Lcd Messages - HP Carrier-grade cc2300 User Manual

Intel Platform Instrumentation Control (PIC) Console User's Guide

Broadcast and LCD Messages

The following table lists broadcast and LCD messages.
Broadcast messages are sent across the network to client computers. The general format of
broadcast messages is:
Check <group_name> at server <server_name>
LCD messages are displayed on the managed server's LCD. These are limited to 32 characters;
longer messages are truncated. The general format of LCD messages is:
Check: <group_name>
Broadcast and LCD Messages
Message
Check: Temperature Sensor.
Check: Temperature Probe.
Check: Voltage Sensor.
Check: Voltage Probe.
Check: Security Sensor.
Check: Physical Container Global Table.
Check: Cooling Fan.
Check: Memory Array.
Check: Host Adapter.
Check: Logical Unit.
Check: Controller Information.
Check: Physical Drive Information.
Check: Processor.
Check: Power Unit Global Table.
Check: Power Supply.
Check: Indication Control Group.
Check: Storage Device Events.
Check: Storage Controller Events.
Check: System Slot.
Description
A temperature sensor reported a change in state
(OK/Noncritical/Critical).
A voltage sensor reported a change in state
(OK/Noncritical/Critical).
System chassis front panel or side panel has been opened (or it
was open and has been closed).
System fan has stopped (or restarted).
A memory error has been reported on the system.
A SCSI board reported a state change.
A SCSI device reported a state change.
A RAID controller reported a state change.
A RAID drive reported a state change.
A processor error has been reported on the system.
A power unit redundancy state change has been reported on
the system.
A power supply failed on the system.
The LAN Adapter reported a threshold crossing.
A SCSI device reported a state change.
A SCSI controller reported a state change.
A PHP slot reported a state change.
39