HP Carrier-grade cc2300 User Manual page 26

Immediate power off
Immediate hardware reset
Immediate NMI
Procedure:
1. On the PIC main window, click beside a sensor name in the navigation pane to see the list
of available sensors.
2. Select an entry from the list.
3. Select the Alert Actions tab.
4. Select the threshold type or state change condition.
5. Change the event actions associated with the selected threshold type or state change
condition.
6. Click <Apply> to save your changes.
26
Select this option if you want to immediately power down the server. This
action is an immediate power-off without a shutdown of the OS; it might
corrupt files.
Select this option if you want to immediately reset the server via hardware.
This action is an immediate hard reset without a shutdown of the OS; it might
corrupt files.
Select this option if you want to cause a hardware Non-Maskable Interrupt
(NMI). If this feature is not supported on the managed server, this option is
grayed out and disabled.