Lifescan In Duo Manual page 36

36
TESTING YOUR BLOOD GLUCOSE LEVELS
Cleaning the OneTouch
• Clean the sampler with soapy water as needed.
To disinfect the sampler, prepare a disinfectant
solution of 1 part household bleach to 10 parts
water. Dampen a cloth in this solution and wipe
the sampler thoroughly. Soak only the cap(s) for at
least 30 minutes in the disinfectant solution. Do
not soak the OneTouch
in liquid. Rinse the sampler and cap with water and
dry thoroughly.
Performing a blood glucose test
Insert the OneTouch
• Insert the OneTouch
end-first and facing up, into the test port. Push the
OneTouch ® Ultra Test Strip in firmly until it will go
no further.
• The InDuo™ meter will turn on automatically. All
segments on the meter display will appear briefly.
Then the code number is displayed, followed by
the apply symbol R with the unit of measurement
(fi or Á). Verify that the calibration code
and unit of measurement are set correctly.
® UltraSoft™ Blood Sampler
UltraSoft™ Blood Sampler
®
® Ultra Test Strip
Ultra Test Strip, contact bars
®