Lifescan In Duo Manual page 2

InDuo™ BLOOD GLUCOSE METER AND INSULIN DOSER
Data port
Test port
Dose selector
Meter display
LOT number
Slide
Residual scale
Window
M button
Piston rod
C button
Insulin doser
display
Push button
Release button
InDuo™ METER AND INSULIN DOSER DISPLAY SYMBOLS
Ctl Ketones?
Indicates a control solution Appears when a blood glucose test
test result. result is above 13.3 mmol/L.
Code Mem
Appears with the code Indicates a test result stored in the
number of the memory.
OneTouch ® Ultra Test
Test result area
Strip currently in use.
Test results are displayed here.
Apply symbol (A decimal point appears when the unit
Tells when to apply of measurement is millimoles per litre.)
the sample.
Unit of measurement
Battery symbol The meter has been pre-set in either
mmol/L or mg/dL. Confirm that the
Appears when the meter
battery power is low or unit of measurement is correct when
must be replaced. Month Day Hour Minutes the apply symbol appears during
blood application.
Circle
Confirms that the delivery has been
Time segment
completed.
The segments indicate the
time passed since delivery.
Dose
1 segment represents 1 hour.
Shows the number of insulin units
dialed.
InDuo™ COMPONENTS
OneTouch ® UltraSoft™ Adjustable Blood Sampler OneTouch
Test Strip
Ejection / Cocking control
Release button
Deep puncture
Cap
Indicator mark
Puncture depth
setting knob
Shallow puncture
OneTouch ® UltraSoft™ Lancet
Protective disk
NovoFine ® Penfill ® 3 ml
6 mm or 8 mm w
Rubber membrane White bar code band
Outer needle Inner Needle Protective Colour-coded Colour- Glass ball
cap needle tab cap coded (for insulin
cap suspensions only)
band
® Ultra
Top edge
Confirmation
window
Contact bars
Rubber
stopper