Lifescan In Duo Manual page 10

10
GETTING YOUR InDuo™ SYSTEM READY FOR USE
Top edge
Apply a sample here,
where the narrow
channel meets the
top edge of
OneTouch ® Ultra
Test Strip.
Confirmation
window
This is where you
confirm if a large
enough sample
has been applied
to the top edge.
Contact bars
Insert this end of
OneTouch ® Ultra
Test Strip into the
InDuo™ meter.
æ OneTouch
® Ultra Test Strips
Your InDuo™ meter is designed for use only with
OneTouch Ultra Test Strips.
®
• Store the OneTouch
cool, dry place below 30°C (86ºF). Keep away from
direct sunlight and heat. Do not refrigerate.
• Store your OneTouch
original vial only; do not transfer them to a new
bottle or any other container.
• After removing a OneTouch
the vial, immediately replace the vial cap and close
it tightly.
• With clean, dry hands, you may touch the test
strip anywhere on its surface when removing it
from the vial or inserting it into the meter.
• Use each OneTouch
after removing it from the vial.
• Write the discard date on the vial label when you
open it for the first time. Discard remaining
OneTouch Ultra Test Strips and the vial 3 months
®
after the vial was first opened.
® Ultra Test Strip package in a
® Ultra Test Strips in their
® Ultra Test Strip from
® Ultra Test Strip immediately